Making quick-look flare spectrograms and movies

This page documents instructions for EOVSA Scientists-on-Duty (SoD) to create quicklook flare spectrograms and movies as part of their daily routines.

Prerequisites

Login into the pipeline machine with your account:

ssh -X <your_user_name>@pipeline

If your default shell is not bash, enter bash by

bash

Configuring Access to the Interim Database (IDB)

To process and calibrate EOVSA raw "Interim" Database (IDB) data, access to the SQL database containing the calibration data is required. Perform the following steps to configure access:

Obtain Database Credentials: Contact Bin Chen to request the <username>, <account_name>, and <password> for database access.

Create a ".netrc" File: Create a ".netrc" file in your home directory ("$HOME") with the following contents, replacing "<username>," "<account_name>," and "<password>" with the actual database credentials:

machine eovsa-db0.cgb0fabhwkos.us-west-2.rds.amazonaws.com
           login <username>
           account <account_name>
           password <password>

Secure the ".netrc" File: To ensure that the file is only accessible by you, set its permissions to only allow owner read/write:

chmod 600 ~/.netrc

Set up the Python Environment

If the following is not already in your ~/.bashrc file, do the following

alias loadpyenv3.8='source /home/user/.setenv_pyenv38'
export EOVSADBJSON=/common/python/current/EOVSADB.json 

Load the Python 3.8 environment

loadpyenv3.8
ipython --pylab

Producing EOVSA quick-look flare spectrograms

Step 1: Checking Possible flares

Verify the possible flares on the daily EOVSA Solar Dynamic Spectrogram, for example:

http://ovsa.njit.edu/browser/?suntoday_date=2024-05-07

In this example, we see a possible flare that happened around 16:30 UT, which appears as a bright vertical stripe in the daily cross-power dynamic spectrum.

For better visualization and flare time precision, check the higher-resolution dynamic spectra at:

http://ovsa.njit.edu/flaremon/. "XSPYYYYMMDDHHMMSS.png" are the file names you are looking for.

Since 2024-May-05, real-time flare detection figures and list are also available at:

http://ovsa.njit.edu/flaremon/FLM20240507.png http://ovsa.njit.edu/flaremon/flarelist/flarelist_2024-05-07.txt

Step 2: Analyze the flare

Enter a working directory. We have limited space under /home, so it is better to go to your directory under /data1/.

cd /data1/<your_user_name>/

Obtain IDB files by providing a time range that encloses the flare. This step will also perform various calibration steps (absolute flux, attenuator gain, and feed rotation), so it may take a while (a few minutes per file). During the course, it will also ask you to confirm the files to be processed. Each IDB file is supposed to be 10-minute long. The naming convention is "IDByyyymmddhhmmdd," with the time indicating the start time of the file.

In Python, enter the following:

from eovsapy import flare_spec as fs 
from eovsapy.util import Time 

files = fs.calIDB(Time(['2024-05-07 16:20','2024-05-07 16:35'])) 

The timerange corresponds to these files (will take about 8 minutes to process)
/data1/eovsa/fits/IDB/20240507/IDB20240507162024
/data1/eovsa/fits/IDB/20240507/IDB20240507163024
Do you want to continue? (say no if you want to adjust timerange) [y/n]?y 

The previous step, if successful, will produce a list of IDB files under the current directory

In [21]: print(files)
['./IDB20240507162024', './IDB20240507163024']

Inspect the spectrograms and see if all the antennas look okay.

out, spec_tp, spec_xp, time_axis, freq_axis = fs.inspect(files) 

Two figures will be produced. One two-panel figure shows the median total-power spectrogram across all antennas and a cross-power spectrogram across a set of baselines defined by "uvrange" (default to 45 to 300 m).

Another shows total-power spectrograms for all 16 antennas. (Note the antenna names go from 1 to 16. Ant 14 is the 27-m for calibrations, and Ants 15 and 16 are not yet connected to the system, but will be available soon.)

To fine-tune the color normalization, you can directly call the plt_quicklook_specs() function by providing spec_tp, spec_xp, and out:

 fs.plt_quicklook_specs(spec_tp, spec_xp, out=out, vmin_xp=1., vmax_xp=100., vmin_tp=10., vmax_tp=600.) 

Check the EOVSA Observing Log for antennas that were not working. We should also check the total-power spectrograms to see if there are any anomalies. In this example, except for Ant 10, all others look okay. However, the observing log says Ant 7 has issues with the Y polarization. Let us exclude both of them using the "ant_str" parameter. Also, adjust the normalization for the spectrograms using "vmin_tp" and "vmax_tp" for total power and "vmin_xp" and "vmax_xp" for cross power.

 out, spec_tp, spec_xp = fs.inspect(files, ant_str='ant1-6 ant8-9 ant11-13', vmin_xp=1., vmax_xp=100., vmin_tp=10., vmax_tp=600.) 

Use the figure above to 1) choose the background interval (bgidx), 2) identify the flare peak time, 3) select frequencies for plotting. The box at the top-right of the plot shows the time index/time string, frequency index/frequency string, flux for total power and cross power at the location of your cursor. Move your cursor around and write the information down. For the background interval, I chose time indices from 170 to 220, as they are close to the flare time, but do not appear to have any flare emission. Also, make sure the range does not have strong RFIs. The parameter "tpk" flare peak time determines the name of the resulting files (.png and .fits) and the flare_id. In this example, I found the peak time is very close to 2024-05-07T16:29:01. See the snapshot below.

Step 3: Write out final products

Now, we are ready to make the final products for the spectrograms using the make_plot() function. To ensure the color scaling and antenna/baseline selection are optimized, the cross-power and total-power spectrograms need to be created separately.

Producing final cross-power spectrogram

For the median cross-power spectrogram, our previous selections of the antennas should be fine, as it is a median over many baselines. Also, as we advise to our users, the cross-power spectrograms are not supposed to be used for quantitative spectral analysis but only as a reference for, e.g., timing analysis. So small variations in the flux are okay.

 f, ax0, ax1 = fs.make_plot(out, bgidx=[170, 220], vmin=0.1, vmax=110, lcfreqs=[120, 190, 270, 350], ant_str='ant1-6 ant8-9 ant11-13', tpk='2024-05-07 16:29:01', spec_type='xp', writefits=True) 

File:Eovsa.spec xp.flare id 20240507162901.png

A second background interval can be defined after the flare, if desired. The background will be an interpolation of the two (before and after the flare). e.g., bg2idx=[1000,1010]

In this example, the output files are "eovsa.spec_xp.flare_id_20240507162901.png" and "eovsa.spec_xp.flare_id_20240507162901.fits."

Producing final total-power spectrogram

For the total-power spectrum, we need to be more careful. The final product is a median over a number of selected antennas. We need to ensure the total-power spectrograms from these selected antennas are consistent with each other. The exact selection is subjective and varies from observer to observer, but one wants to avoid using antennas that are 1) not working, 2) too noisy, or 3) show significant differences from the others. In this example, I chose antennas 1, 4, 5, 12, and 13, based on the total-power spectrograms plot made by flare_spec.inspect().

f, ax0, ax1 = fs.make_plot(out, bgidx=[170, 220], vmin=1., vmax=200, lcfreqs=[120, 190, 270, 350], ant_str='ant1 ant4 ant5 ant12 ant13', tpk='2024-05-07 16:29:01', spec_type='tp', writefits=True)) 

At the end, copy the .fits file to /common/webplots/events/2024:

 cp eovsa.*.flare_id_20240507162901.* /common/webplots/events/2024 

and include the flare in the wiki Flare List:

http://ovsa.njit.edu/wiki/index.php/2024