2016 November: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
19:18 UT Reboot ROACHes to clear fault light and test whether large delays are still present. They were power-cycled and reloaded. | 19:18 UT Reboot ROACHes to clear fault light and test whether large delays are still present. They were power-cycled and reloaded. | ||
19:24 UT Started roachcal.scd to take packet capture data for checking delays. | 19:24 UT Started roachcal.scd to take packet capture data for checking delays. '''Still bad!''' | ||
= Nov 05 = | |||
03:41 UT Found a potential problem DELAYCAL_END.ctl, so took another two sets of data. '''Still bad!''' | |||
04:14 UT Started another set of data. After studying schedule.py, another problem was found. DELAYCAL_END command has to have CIEL-2 as second value on the line, otherwise source id is set to None! | |||
Revision as of 04:20, 5 November 2016
Nov 04
19:18 UT Reboot ROACHes to clear fault light and test whether large delays are still present. They were power-cycled and reloaded.
19:24 UT Started roachcal.scd to take packet capture data for checking delays. Still bad!
Nov 05
03:41 UT Found a potential problem DELAYCAL_END.ctl, so took another two sets of data. Still bad!
04:14 UT Started another set of data. After studying schedule.py, another problem was found. DELAYCAL_END command has to have CIEL-2 as second value on the line, otherwise source id is set to None!