Skip to content

2026 September

Daily observation notes published from the eovsadata canonical log.

September 01

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant 2 still out with Dec controller problem.
12 Ant12 got stuck due to a bad fuse
13 Ant13 lost communications switch/rabbit board
15 04:30 UT Ant 15 star pointing was initiated and ran until 06:00 UT. The / Aug. 31 evening refcal was skipped due to this.

Antenna availability: automatic assessment.

September 02

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
13 Antenna 13 was repaired and resumed tracking at 17:30 UT, but its delay calibration was not performed until Sept 4, 2026.
2 Ant 2 still out with Dec controller problem.
12 Ant12 got stuck due to a bad fuse
13 Ant13 lost communications switch/rabbit board
Normal startup today.
13 Ant13 fixed (bad fuse replaced). Back to work at 17:30 UT

Antenna availability:

Antenna Status
1 used
2 not_used
3 used
4 used
5 used
6 used
7 not_used
8 used
9 used
10 used
11 used
12 not_used
13 not_used
14 not_used
15 used

September 03

No observation notes recorded.

Antenna availability: automatic assessment.

September 04

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant 2 still out with Dec controller problem.
12 Ant12 got stuck due to a bad fuse
13 Ant13 lost communications switch/rabbit board
Normal startup today. / PHASECALs skipped @19:54 UT and 23:14 UT

Antenna availability: automatic assessment.

September 05

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
12 Ant12 got stuck due to a bad fuse

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 07

A coarse EOVSA baseline correction was applied before the morning refcal. Ant15’s baseline error correction is large—over 7 ns.

Antenna availability: automatic assessment.

September 08

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
12 Ant12 got stuck due to a bad fuse

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 09

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
12 Ant12 bad fuse replaced. It's back tracking at 15:46 UT; Ant12 back tracking, bad fuse replaced.
11 Ant11 stopped after PHASECAL, $pcycle at 22:35UT
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
Normal startup today.
11 Ant11 stopped at 22:30UT after PHASECAL

Antenna availability: automatic assessment.

September 10

Ant12’s new fuse was upside down and blew.
A fine EOVSA baseline correction was applied before the morning refcal. Ant15 received a correction of up to 0.3 ns.

Antenna availability: automatic assessment.

September 11

Ant12 fuse was replaced again, it worked for a while but blowed again at 23:30UT.
A fine EOVSA baseline correction was applied before the morning refcal. Ant15 received a correction of up to 0.4 ns.

Antenna availability: automatic assessment.

September 13

Ant15 got stuck in EL in the morning.

Antenna availability: automatic assessment.

September 14

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
12 Ant12 AZ got stuck and blowed the fuse
15 Ant15 got stuck in EL in the morning.

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 15

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
12 Ant12 problem fixed and it started tracking at 17:45UT
15 Ant15 came back by itself and it started tracking at 16:05UT

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 16

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber

Observations

Normal startup today.
Multiple SOLPNTCAL during the morning to find Ant15 focus position.
ROACH2 failed at 22:30UT

Antenna availability: automatic assessment.

September 17

No observations due to the ROACH2 failure on Oct 16th.

Antenna availability: automatic assessment.

September 18

No observations due to the ROACH2 failure on Oct 16th.

Antenna availability: automatic assessment.

September 19

No observations due to the ROACH2 failure on Oct 16th.

Antenna availability: automatic assessment.

September 20

No observations due to the ROACH2 failure on Oct 16th.

Antenna availability: automatic assessment.

September 21

No observations due to the ROACH2 failure on Oct 16th.

Antenna availability: automatic assessment.

September 22

No observations due to the ROACH2 failure on Oct 16th.

Antenna availability: automatic assessment.

September 23

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
12 Ant12 started tracking at 16:00UT

Observations

The ROACH2 was fixed. Normal startup today.

Antenna availability: automatic assessment.

September 24

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
13 Ant13 FEM communication problem. It stopped tracking at 20:30UT

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 25

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
13 Ant13 FEM communication was fixed. It started tracking at 16:10UT

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 26

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 27

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 28

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 29

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber

Observations

Normal startup today.

Antenna availability: automatic assessment.

September 30

Configuration: ATA feed is on Ant6.

Issues and outages

Time (UT) Antennas Details
2 Ant2 still out with Dec controller problem.
7 Ant7 FEM broken fiber
13 Ant13 TEC was fixed in the morning. It was back tracking at 17:45 UT

Observations

Normal startup today.

Antenna availability: automatic assessment.